April 19, 1998

Richard Smoker, Editor in Chief
Power Press
1452 Industry Rd.
San Francisco, CA 94618

Re: Progress report on writing the guidelines and parameters on the construction of a mycological grow room.

Dear Mr. Smoker:

We are pleased to have the opportunity to discuss the status of our development of construction plans for a mycological growroom. As you are aware, the market for exotic mushrooms has increased tremendously over the past several years. Properly constructing and marketing plans for the mycological grow room will assist your organization by filling a niche in current publications and provide a necessary resource for the horticulturist.

The attached progress report outlines Mushroom Mountain Company's status on the project. In the progress report we include our intended audience, description of the work, the outline, a list of figures, and our overall appraisal of the project.

We are confident in our ability to produce the highest quality document. Should you have any questions feel free to call the number above at any time.

Sincerely,



Bradleigh K. Bixford, Proprietor
Mushroom Mountain Co.

Attached: Progress Report

• Developing floorplans with elevations.
• Developing the detail drawings.
• Writing the necessary text.

Audience

Description of the proposed work

Outline. The floorplans included will have been extensively tested and will provide near-perfect conditions although a focus of this manual is on the necessary factors to consider when building the room. This way the individual grower can customize the included floorplans to fit his/her specific needs or area. Formulas to calculate air exchange rates and ducting are included to aid in this area. Following is the outline for the manual:

1. Introduction
2. Overview of general process of mushroom cultivation
   1. Spore collection, germination and isolation of mycelium
   2. Preparation of the inoculum
      1. Expansion of the mycelial mass on agar then grain
      2. Implantation of grain spawn on substrate
   3. Fruitbody initialization and development
3. Sterile technique
   1. Sources of contamination
      1. Immediate external environment
      2. Culture medium
      3. Culturing equipment
      4. Cultivator's body and clothes
      5. Mushroom spores of mycelium
   2. Design of sterile laboratory
      1. Schematic
      2. Tools, accessories
4. Mycological growroom
   1. Structure
      1. Floorplans, elevations
      2. Insulation
      3. Sealing
      4. Drainage
   2. Shelving and trays
   3. Environmental control systems
      1. Air
      2. Purification
      3. Filters
      4. Fans
      5. Air exchange formula
      6. Exhaust vents
      7. Ducting formula
      8. Temperature
         1. Heating
         2. Cooling
      9. Humidification
         1. Live steam
         2. Mist
      10. Monitoring equipment
          1. Thermostats
          2. Humidistats
      11. Lighting
5. Putting it all together (conclusion)

Bibliography. Here are the information sources we have been working with:

1. Atkins, F. "Buildings for Mushroom Holdings." The Mushroom Journal (November, 1965), 191-204.
2. Austin, Phillip R. Encyclopedia of Cleanrooms, Bio-Cleanrooms, and Aseptic Areas. New York: Interpharm Press, 1995
3. Bittner, C.W. "The Pathogens of Mushroom Spawn." Mushroom Science (December, 1972), 601-606.
4. Drake, M.G. "Insulation for the Mushroom Grower." Mushroom Growers Association Bulletin (March, 1961), 111-126.
5. Edwards, R.L. "Mushroom House Ventilation in Theory and Practice." The Mushroom Journal (August, 1973), 3-14.
6. Institute of Environmental Science. Federal Standard 209E (Fed-Std-209E: Airborne Particulate Cleanliness-Classes in Cleanrooms and Clean Zones. Fed-Std-209E. Washington: U.S. Government Printing Office, 1992.
7. Schroeder, M.E., Schisler, L.C., and Wuest, P.J. "A Unitized Forced Air Ventilation System for Mushroom Growing." Progress Report No. 302 (January, 1970) 1-35.
8. Shiio, T., Okunishi, M., and Okumura, S. "Fundamental Studies on the Large Scale Cultivation of Edible Fungi." Mushroom Science IX (Part 1) (April, 1974) 17-48.
9. Sinden, J.W. "Disease Problems in Technologically Advanced Mushroom Farms." Mushroom Science VIII (September, 1972) 125-130.
10. Stamets, P., Chilton, J.S. The Mushroom Cultivator: A Practical Guide to Growing Mushrooms at Home. Olympia, Washington: Agarikon Press, 1984.
11. Tschierpe, H.J. "Environmental Factors and Mushroom Growing." The Mushroom Journal (Jan.-Feb., 1972) 23-30.
12. Wuest, P.J "The Use of Steam for Phase II." Mushroom News (November, 1970) 18-23.

List of Figures. Here are the illustrations we are planning for the project:

1. Pictorial overview of the general process of mushroom cultivation
2. Schematic of a simple sterile laboratory
3. Floorplans and elevations of the mycological grow room
4. Shelving system schematic
5. Tray system schematic
6. Air purification and temperature control system detail
7. Humidification system detail

Development of Floorplans and Elevations

Completed. We were able to make good progress in the development of the drawings and have completed both the floorplans and the elevations. We have enclosed them and await your final input. the drawings completed refer to Figure 2 andFigure 3.

Work to be done. Upon receipt of the final input the revisions will need to be made to the drawings, they will be made photo-ready and inserted into the text.

Development of the Detail Drawings

• Completed. This phase proceeded at a very good pace and we have completed all the initial detail drawings. We have enclosed them and await your final input. The corresponding figures they refer to are:
  • Figure 1
  • Figure 4
  • Figure 5
  • Figure 6
  • Figure 7

• Work to be done. The final revisions will be done pending your input. They will be made photo-ready to save your set up time and inserted into the text.

Writing the Necessary Text

• Completed. We were able to finish a good deal of the text and have enclosed it for your review. The corresponding sections from the outline are as follows:
  • Section I
  • Section II
  • Section IIIA

• Work to be done. Section III proved to be difficult due to the technical nature of the formulas. We have found errors in our figures and as soon as they are resolved we will send this and section IV to Mr. Smoker.

Overall Appraisal

After all final revisions of the drawings and text are completed they will be made photo-ready, compiled, and immediately sent to Mr. Smoker. The problems we have incurred have set our final date back two weeks. We urge you to call at our office number with any problems you might have.

Interested in courses related to this page or a printed version? See the resources page.

Return to the main menu of this online textbook for technical writing.